action-stalwart-install/.github/workflows/test.yml

name: Test Stalwart Installation Action

on:
  push:
    branches: [main, develop]
  pull_request:
    branches: [main]
  workflow_dispatch:

jobs:
  # Test basic installation without configuration
  test-basic-install:
    name: Basic Installation (No Config)
    runs-on: ubuntu-latest
    
    steps:
      - name: Checkout repository
        uses: actions/checkout@v4
      
      - name: Install dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y jq curl
      
      - name: Run basic installation
        uses: ./
        # No inputs - should install with defaults
      
      - name: Wait for service to fully start
        run: |
          echo "Waiting for Stalwart to fully initialize..."
          sleep 15
      
      - name: Verify Stalwart service is running
        run: |
          sleep 10  # Give service time to start
          
          # Check if systemd is available
          if command -v systemctl >/dev/null 2>&1 && systemctl --version >/dev/null 2>&1; then
            echo "Checking service status with systemd..."
            sudo systemctl status stalwart --no-pager || true
            if sudo systemctl is-active --quiet stalwart; then
              echo "✓ Stalwart service is running (systemd)"
            else
              echo "::warning::Stalwart service not active in systemd, checking process..."
            fi
          else
            echo "::warning::systemd not available, checking process directly..."
          fi
          
          # Check if process is running
          if pgrep -x stalwart >/dev/null; then
            echo "✓ Stalwart process is running"
          else
            echo "::error::Stalwart process is not running"
            ps aux | grep stalwart || true
            exit 1
          fi
      
      - name: Check Stalwart binary
        run: |
          if [ ! -f /opt/stalwart/bin/stalwart ]; then
            echo "::error::Stalwart binary not found"
            exit 1
          fi
          /opt/stalwart/bin/stalwart --version
      
      - name: Test web admin accessibility
        run: |
          # Wait for API to be ready
          for i in {1..30}; do
            if curl -sf http://localhost:8080/login >/dev/null 2>&1; then
              echo "✓ Web admin is accessible"
              exit 0
            fi
            sleep 2
          done
          echo "::error::Web admin not accessible after 60 seconds"
          exit 1

  # Test installation with admin password
  test-with-password:
    name: Installation with Admin Password
    runs-on: ubuntu-latest
    
    steps:
      - name: Checkout repository
        uses: actions/checkout@v4
      
      - name: Install dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y jq curl
      
      - name: Install with admin password
        uses: ./
        with:
          admin_password: 'TestPassword123!@#'
      
      - name: Wait for service to fully start
        run: |
          echo "Waiting for Stalwart to fully initialize..."
          sleep 15
      
      - name: Verify service is running
        run: |
          # Check process
          if ! pgrep -x stalwart >/dev/null; then
            echo "::error::Stalwart process is not running"
            echo "Process list:"
            ps aux | grep stalwart || true
            echo "PID file:"
            cat /var/run/stalwart.pid 2>/dev/null || echo "No PID file"
            echo "Logs:"
            tail -50 /opt/stalwart/logs/*.log 2>/dev/null || echo "No logs"
            exit 1
          fi
          echo "✓ Stalwart is running"
      
      - name: Test authentication with new password
        run: |
          # Wait for API to be ready
          echo "Waiting for Stalwart API..."
          for i in {1..30}; do
            if curl -sf http://localhost:8080/login >/dev/null 2>&1; then
              echo "✓ API is ready"
              break
            fi
            sleep 2
          done
          
          # Try to authenticate with new password
          RESPONSE=$(curl -sf -X POST http://localhost:8080/api/authenticate \
            -H "Content-Type: application/json" \
            -d '{"login":"admin","password":"TestPassword123!@#"}')
          
          TOKEN=$(echo "$RESPONSE" | jq -r '.token // empty')
          
          if [ -z "$TOKEN" ]; then
            echo "::error::Failed to authenticate with new password"
            echo "Response: $RESPONSE"
            exit 1
          fi
          
          echo "✓ Successfully authenticated with new password"

  # Test full configuration with domains and users
  test-full-config:
    name: Full Configuration (Domains + Users)
    runs-on: ubuntu-latest
    
    steps:
      - name: Checkout repository
        uses: actions/checkout@v4
      
      - name: Install dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y jq curl
      
      - name: Install with full configuration
        uses: ./
        with:
          admin_password: 'AdminPass123!@#'
          domains: |
            [
              {
                "name": "test1.local",
                "description": "Primary test domain"
              },
              {
                "name": "test2.local",
                "description": "Secondary test domain"
              }
            ]
          users: |
            [
              {
                "email": "user1@test1.local",
                "password": "UserPass123!",
                "name": "Test User One",
                "quota": 1073741824
              },
              {
                "email": "user2@test1.local",
                "password": "UserPass456!",
                "name": "Test User Two",
                "quota": 2147483648
              },
              {
                "email": "admin@test2.local",
                "password": "AdminUser789!",
                "name": "Admin User",
                "quota": 5368709120
              }
            ]
      
      - name: Wait for service to fully start
        run: |
          echo "Waiting for Stalwart to fully initialize..."
          sleep 15
      
      - name: Verify service is running
        run: |
          # Check process
          if ! pgrep -x stalwart >/dev/null; then
            echo "::error::Stalwart process is not running"
            echo "Process list:"
            ps aux | grep stalwart || true
            echo "PID file:"
            cat /var/run/stalwart.pid 2>/dev/null || echo "No PID file"
            echo "Logs:"
            tail -50 /opt/stalwart/logs/*.log 2>/dev/null || true
            exit 1
          fi
          echo "✓ Stalwart is running"
      
      - name: Verify admin password was changed
        run: |
          # Wait for API to be ready
          echo "Waiting for Stalwart API..."
          for i in {1..30}; do
            if curl -sf http://localhost:8080/login >/dev/null 2>&1; then
              echo "✓ API is ready"
              break
            fi
            sleep 2
          done
          
          RESPONSE=$(curl -sf -X POST http://localhost:8080/api/authenticate \
            -H "Content-Type: application/json" \
            -d '{"login":"admin","password":"AdminPass123!@#"}')
          
          TOKEN=$(echo "$RESPONSE" | jq -r '.token // empty')
          
          if [ -z "$TOKEN" ]; then
            echo "::error::Failed to authenticate with admin password"
            echo "Response: $RESPONSE"
            exit 1
          fi
          
          echo "✓ Admin authentication successful"
          echo "TOKEN=$TOKEN" >> $GITHUB_ENV
      
      - name: Verify domains were created
        run: |
          # List domains via API
          DOMAINS=$(curl -sf -X GET http://localhost:8080/api/domain \
            -H "Authorization: Bearer $TOKEN")
          
          echo "Domains response: $DOMAINS"
          
          # Check if our test domains exist
          if echo "$DOMAINS" | jq -e '.[] | select(.name == "test1.local")' >/dev/null; then
            echo "✓ Domain test1.local found"
          else
            echo "::warning::Domain test1.local not found (API might use different structure)"
          fi
      
      - name: Verify users were created
        run: |
          # List accounts via API
          ACCOUNTS=$(curl -sf -X GET http://localhost:8080/api/account \
            -H "Authorization: Bearer $TOKEN")
          
          echo "Accounts response: $ACCOUNTS"
          
          # Check if users exist
          if echo "$ACCOUNTS" | jq -e '.[] | select(.name == "user1@test1.local")' >/dev/null; then
            echo "✓ User user1@test1.local found"
          else
            echo "::warning::User user1@test1.local not found (API might use different structure)"
          fi
      
      - name: Show logs on failure
        if: failure()
        run: |
          echo "=== Stalwart Service Status ==="
          if command -v systemctl >/dev/null 2>&1; then
            sudo systemctl status stalwart --no-pager || true
          fi
          
          echo -e "\n=== Process Status ==="
          ps aux | grep stalwart || true
          
          echo -e "\n=== Stalwart Logs ==="
          if command -v journalctl >/dev/null 2>&1; then
            sudo journalctl -u stalwart -n 100 --no-pager || true
          else
            sudo tail -n 100 /opt/stalwart/logs/*.log 2>/dev/null || true
          fi
          
          echo -e "\n=== Configuration File ==="
          sudo cat /opt/stalwart/etc/config.toml || true
          
          echo -e "\n=== Network Ports ==="
          sudo netstat -tuln | grep -E ':(25|587|465|993|8080)' || true
          sudo ss -tuln | grep -E ':(25|587|465|993|8080)' || true

  # Test error handling
  test-error-handling:
    name: Error Handling Tests
    runs-on: ubuntu-latest
    
    steps:
      - name: Checkout repository
        uses: actions/checkout@v4
      
      - name: Test invalid JSON (domains)
        id: test_invalid_domains
        continue-on-error: true
        uses: ./
        with:
          admin_password: 'TestPass123'
          domains: 'invalid json string'
      
      - name: Verify invalid JSON was caught
        run: |
          if [ "${{ steps.test_invalid_domains.outcome }}" = "success" ]; then
            echo "::error::Action should have failed with invalid JSON"
            exit 1
          fi
          echo "✓ Invalid domains JSON was properly rejected"
      
      - name: Clean up after failed test
        if: always()
        run: |
          # Stop service
          if command -v systemctl >/dev/null 2>&1; then
            sudo systemctl stop stalwart || true
            sudo systemctl disable stalwart || true
          fi
          
          # Kill process if still running
          sudo pkill -9 stalwart || true
          
          # Remove installation
          sudo rm -rf /opt/stalwart || true

  # Test on different Ubuntu versions
  test-ubuntu-versions:
    name: Test on Ubuntu ${{ matrix.os }}
    runs-on: ${{ matrix.os }}
    strategy:
      matrix:
        os: [ubuntu-20.04, ubuntu-22.04, ubuntu-24.04]
      fail-fast: false
    
    steps:
      - name: Checkout repository
        uses: actions/checkout@v4
      
      - name: Install dependencies
        run: |
          sudo apt-get update
          sudo apt-get install -y jq curl
      
      - name: Install Stalwart
        uses: ./
        with:
          admin_password: 'TestPassword123'
      
      - name: Wait for service to fully start
        run: |
          echo "Waiting for Stalwart to fully initialize..."
          sleep 15
      
      - name: Verify installation
        run: |
          # Check if process is running
          if pgrep -x stalwart >/dev/null; then
            echo "✓ Stalwart running on ${{ matrix.os }}"
          else
            echo "::error::Stalwart not running on ${{ matrix.os }}"
            ps aux | grep stalwart || true
            tail -50 /opt/stalwart/logs/*.log 2>/dev/null || true
            exit 1
          fi
      
      - name: Test API accessibility
        run: |
          # Wait for API to be ready
          echo "Waiting for API on ${{ matrix.os }}..."
          for i in {1..30}; do
            if curl -sf http://localhost:8080/login >/dev/null 2>&1; then
              echo "✓ API accessible on ${{ matrix.os }}"
              exit 0
            fi
            sleep 2
          done
          echo "::error::API not accessible on ${{ matrix.os }}"
          tail -50 /opt/stalwart/logs/*.log 2>/dev/null || true
          exit 1

  # Summary job
  test-summary:
    name: Test Summary
    runs-on: ubuntu-latest
    needs: [test-basic-install, test-with-password, test-full-config, test-ubuntu-versions]
    if: always()
    
    steps:
      - name: Check test results
        run: |
          echo "## Test Results Summary" >> $GITHUB_STEP_SUMMARY
          echo "" >> $GITHUB_STEP_SUMMARY
          echo "- Basic Install: ${{ needs.test-basic-install.result }}" >> $GITHUB_STEP_SUMMARY
          echo "- With Password: ${{ needs.test-with-password.result }}" >> $GITHUB_STEP_SUMMARY
          echo "- Full Config: ${{ needs.test-full-config.result }}" >> $GITHUB_STEP_SUMMARY
          echo "- Ubuntu Versions: ${{ needs.test-ubuntu-versions.result }}" >> $GITHUB_STEP_SUMMARY
          
          # Fail if any required test failed
          if [ "${{ needs.test-basic-install.result }}" != "success" ] || \
             [ "${{ needs.test-with-password.result }}" != "success" ] || \
             [ "${{ needs.test-full-config.result }}" != "success" ]; then
            echo "::error::One or more tests failed"
            exit 1
          fi
          
          echo "✓ All tests passed!"